To become an electrician is not for the lazy. It is a hard job to do and you need to have a passion to do it well. One will need to complete their national trade test in electricity as well as register as an accredited person and electrical contractor. The North Carolina State Board of Examiners of Electrical Contractors is put into place to help you achieve your goals.
One will need to be willing to spend a lot of time training but in the end it will be well worth it. You will need to get an apprenticeship with a contractor once all your studying has been done and you have passed. There are some instances that apprenticeship is not necessary. If you are lucky enough to be able to be trained by an experienced contractor, this stage can be skipped.
All contractors are classified into three types depending on the work that they perform. The first is the "Line" contractor, who works with high voltage power and distribution lines. They are there to maintain and build the system that transports electricity. This is generated at a power plant before being used in buildings and homes.
Electricians are normally trained under one of these four categories in order to obtain proper licences and certificates. They are general electrician, construction, mining, or engineering electrician. The first is a person that will specialise in wiring of buildings and machines that do not move. They will also repair and maintain the existing infrastructure.
The last is "voice/data/video" whose main work is with low-voltage installations. These include working with fibre optics, security systems, and telecommunications. The fibre optic is a transparent and flexible fibre made from silica or plastic. It is a little thicker than a human hair and works as a light pipe for electric current to travel through.
If you are going to take your examinations for limited, unlimited or intermediate you will have 6 hours to complete it. This will enable you to obtain your electrical contracting license. It is a multiple choice paper of 100 questions.
A mining electrician is a hard job and the working conditions are not for everyone. To remain underground for hours at a time fixing drill rigs or motors that power vehicles can be very claustrophobic for some. It needs to be done as quickly and as safely as possible.
Electrical engineering deals with the applications and study of electricity, electromagnetism, and electronics. You will need to have done electronic engineering and well as electrics and obtained a degree in both. One will need to be able to design electronic circuits, digital as well as power electronics.
Before registering for this examination one must first get authorization from the board. Once this is done the application form and the necessary fees and any other information that is required needs to be returned to them. If you are approved you will receive a letter stating this. Only one sitting for the exam is allowed, if you fail the whole process will need to be repeated.
One will need to be willing to spend a lot of time training but in the end it will be well worth it. You will need to get an apprenticeship with a contractor once all your studying has been done and you have passed. There are some instances that apprenticeship is not necessary. If you are lucky enough to be able to be trained by an experienced contractor, this stage can be skipped.
All contractors are classified into three types depending on the work that they perform. The first is the "Line" contractor, who works with high voltage power and distribution lines. They are there to maintain and build the system that transports electricity. This is generated at a power plant before being used in buildings and homes.
Electricians are normally trained under one of these four categories in order to obtain proper licences and certificates. They are general electrician, construction, mining, or engineering electrician. The first is a person that will specialise in wiring of buildings and machines that do not move. They will also repair and maintain the existing infrastructure.
The last is "voice/data/video" whose main work is with low-voltage installations. These include working with fibre optics, security systems, and telecommunications. The fibre optic is a transparent and flexible fibre made from silica or plastic. It is a little thicker than a human hair and works as a light pipe for electric current to travel through.
If you are going to take your examinations for limited, unlimited or intermediate you will have 6 hours to complete it. This will enable you to obtain your electrical contracting license. It is a multiple choice paper of 100 questions.
A mining electrician is a hard job and the working conditions are not for everyone. To remain underground for hours at a time fixing drill rigs or motors that power vehicles can be very claustrophobic for some. It needs to be done as quickly and as safely as possible.
Electrical engineering deals with the applications and study of electricity, electromagnetism, and electronics. You will need to have done electronic engineering and well as electrics and obtained a degree in both. One will need to be able to design electronic circuits, digital as well as power electronics.
Before registering for this examination one must first get authorization from the board. Once this is done the application form and the necessary fees and any other information that is required needs to be returned to them. If you are approved you will receive a letter stating this. Only one sitting for the exam is allowed, if you fail the whole process will need to be repeated.
About the Author:
You can visit www.ncaec.org for more helpful information about The North Carolina State Board Of Examiners Of Electrical Contractors Should Be Heeded.
No comments:
Post a Comment